Category Archives: Art

How to Drawing Hooded Woman

This time we will discuss about How to Draw Faces Hooded Woman using a graphite pencil or pencil in black and white. The technique I use is drawing shading techniques. You can see my other articles to find an explanation about shading techniques.

women art

Preparation and Equipment
Perform initial setup by providing equipment for drawing. In practice drawing this time I use Staedtler pencil, pencil size I use is 2B, 3B, 5B. Prepare the eraser, you better also prepare a pencil eraser shaped (photos soon). Shaped pencil eraser, enables you to remove the field that smaller, making it easier for you to give details. You can buy in stores eraser painting tools or stationery store large your city. I use a pencil eraser brands Derwen, please hunt eraser.
For my paper using paper linen color creams, which are usually made of paper drawing. You can buy them in many stores paper, this paper is usually easy to find. Then on the other I will discuss about the various kinds of paper drawings, look at the menu Tips and Tricks.
Make sure you have the board for retaining your paper. Also do not forget you prepare to parapet painting tripod, use a tripod painting tips are solid and not easily swayed or rocking. The latter is preparing to draw a sample.

Started Drawing
A simple way to start is to start drawing a sketch of the face. I usually start by sketching in pencil Staedtler 3B. But you need to adjust the pressure pencil when sketching. Here are the results sighting sketch:

skect proces
Sketch Drawing Process

Note the sketch above, you must set up your pencil pressure. Pencil inscribed not too much pressure. If you are hard to regulate the pressure you are also allowed to use the pencil-sized 2B, 2B pencil drawback is if you Removing them then the rest of the pencil pressure leaving the curve of the line.
The next step is to draw a face with eyes do first. I used to do this, because by doing eye first impression finished painting will be faster so that you can mongoreksi his character thoroughly. You can menggunkanan pencil 5B to give effect to the black in the eye, 5B pencil effect can give the effect of jet-black eyes terliht so sharp. The following appearance:

eye
Draw the eye.

Notice in the picture above, the face image has been seen live by completing the eyes first. You may take 5-10 minutes to complete the picture of the eye. Very easy is not.
The next step is how to draw a face with dark shading gives the overall light on the face, you can use a pencil 5B, I used to use a pencil 5B as this pencil can give dark effect quickly. But you also have to be careful, if the pressure is too strong then the pencil too Hitan effect will be faster. So that the results of shading will look dirty, you should be careful when doing this part of the face. If you are still not able to regulate the pressure on the pencil you can use a pencil 4B or 3B, but you take a concerted long enough time. To view the appearance you can see the following image:

Dark shades of bright pencil 5B.

Next, you need to give a dark shading light again but this time you use a 2B pencil. Use a pencil to the face looks plastic, you must find the differences before and after 2B pencil. Always thoroughly re-dark brightness, if any part of the face is missing the darker the shade the part. On the lips you also have to do with using a 2B pencil. Here is his appearance:

dark face
Finishing using 2B.

You try to put pressure on the pencil are smooth, not too pressed so that the skin looks plastic. The more you wait to give shading then the results will look more refined. Keep using 2B pencil to complete. Correct again if there is the face that is less dark, you can use a pencil 3B, but you have to put pressure subtly pencil.


After construction is complete the next step you have to work on her scarf. There are 2 pencils used in making the veil, which is a pencil 3B and 5B, 3B pencil is used for coloring light dark early, then carefully which parts are darker and use a pencil 5B to give shading. For background, you can give using a pencil 3B and 2B. Following the appearance of the picture.

 

How to Drawing with Pencil for Newbie

You are student who should be involved in art School class  If yes, then you will usually follow a few sessions drawing class. In some schools even made additional schedule in the form of extracurricular activities for students who are interested in drawing. In addition to using paint paintings, most people prefer to use a pencil to draw. In addition to its classic look, some people also assume that the pencil drawing has unique characteristics that were not found on the painting using paint.

art
You may not one of them but inevitably you have to produce work using a pencil when your teacher gives a task so. Therefore, as a beginner would not hurt you to try some of the tips below.

Mechanical Drawing With Pencil

Initial step

As a first step in drawing course you must prepare the tools and the medium you will use. The first thing you should do is to choose the right type of pencil to make your image.
Often, to produce an image of high artistic value, the artist uses some pencils from one or two types of a different character according to its purpose.

Because every brand has a respective standards, it would be better if you choose one brand for all characters pencil you need so that they have the same quality standards as well.

The next thing you should do is to choose the right medium or paper to draw. Similarly with the pencil, so many types of paper available in the market with quality standards respectively.

However, as a rule of thumb you can use a type of paper that is soft but not biodegradable or peel off when removed so that the process of shading can run well. The right paper for drawing paper types are able to bind colors and display colors clearly.

You may encounter some paper when removed caused the particles to exfoliate paper and the image becomes corrupted. You also might find a paper that is not too good at absorbing the colors so that the results you get less than the maximum.

Usually a sketchbook (sketchbook) sold in supermarkets tend to have good quality, but you also have to be careful with fake brands.
Mechanical outline

To produce images using a pencil, start your activities by creating an outline or draft outline of the object to be your image. Use a pencil harder to create a line of light.
Generally, an image of the object has two coating lines, namely a line of light is used as a guideline to create the basic shape and the second object is a thicker line as a pointer edges of objects.

Techniques for making a light line is to use subtle movements to generate a bit of pressure and traction. Light lines usually do not look so obvious and usually is often omitted when finishing or shading.

After creating a light line, then the next is to create a heavier line to determine the edges of the object element. Start by retracing the original line with movements and pressure gradually. Start with smooth and then add pressure so that the lines that were formed then seen more clearly.

But the emphasis should also be careful that the line can still be removed if necessary and does not leave marks on paper. At this stage the line that you created is still in the stage of development so that it is still possible incorrect and should be removed.

In addition to movement and pressure, at this stage you should also pay attention to the character of the pencil you use. You have to understand how the right character to create different levels of thickness.

You can use the pencil to draw a thick line. It is better than using a pencil point. Mechanical pencils character selection is very important in making an outline and objects Shadow. Understanding the principles of the master line will allow you to create a better image

Mechanical Crosshatching

Mechanical Crosshatching

Crosshatching technique or crosshatching done using small lines drawn close together. This technique is used for the early stages of the shadow effect of the object. You can draw a line in one direction (hatching) follows the shape of the object so that the object can be recognized better.
You can also use crosshatching technique to create a more realistic look. This will provide more value and depth in your images.

This technique can be done by drawing a line in one direction and then draw another line that crosses the line before making the lines crossing each other. The more and close the line, it will be more realistic impression of the show.

 
Mechanical circular

Circular technique is a technique for creating contrasting textures to make a circle and a large graffiti. You can make a small circle by moving your pencil with a swirling motion.
This technique is generally carried out in line with the shading technique. A mix of small circles that you created with shading harmony will create the effect of light and dark is more real. This technique is commonly used to create the texture of the skin.

If you create a shadow on the object portraits, then you can use a small solid circles with varying values. If the combination of these are truly compatible, then when someone sees your work, their eyes will blend in with the circles.

shading
Shading techniques

Shading technique is a technique to make a shadow effect on the object. Shading is generally produced through the interaction of light and dark that is visible from the hatch you produce. Generally subtle shadow effect that gives a more aesthetic value ketinbang shadow effects are more rugged.
There are several ways to create subtle shading that is using the pencil pencils to create smooth strokes are adjacent, set crosshatching manner to menibulkan subtle shadow effect.

You can also use the tools to smooth shading in order to get a subtle shadow effect. Some people use cotton as tools, some of them using the eraser even a finger to adjust the color gradation.

To create smooth shading, start with a light line with a starting point that varies then lanjtukan by skimming values (value) to push a little harder to use a softer pencil.
Do not force to use one type of pencil to create value for each pencil has character and function of each. Therefore, you have to really understand the types suitable for manufacturing a shadow effect. You can use shading to create an impression that is more subtle.
Finishing
The final step in the engineering drawing is finishing. In this stage, you can check your work in more detail before making a final result. Begin training your sensitivity to the slightest deficiency can reduce the aesthetic value of your work.

You can enhance the outline or shading that is still less than perfect. At this stage you should also pay attention to the cleanliness of your work. Do not let the small ere cause your hard work less than the maximum. With patience and perseverance, is not impossible that you can produce a high-value work.

 

Such techniques using pencil drawing for beginners, may be useful. If this article is useful to you, we expect participation to share it to your friends in social media. Thanks.